As Holi is coming :: 10 dos and don'ts to follow if your smartphone falls in water. and save your phone's life. - Technopweb

Technopweb

Much About Technology And A Bit About Everything

Facebook

Post Top Ad

As Holi is coming :: 10 dos and don'ts to follow if your smartphone falls in water. and save your phone's life.

Share This
iphone smartphone mobile screen apple water cold drop dew liquid technology white rain glass wet pattern reflection condensation clean gadget blue business mobile phone bubble brand font rainbow background aqua cool rectangle 6s shape plus android ios computer keyboard portable communications device
1. Total immersion of the device usually eliminates warranty, unless an optional "accidental oxidation" guarantee has been added.Make sure you read all the rules of your contract carefully. Sometimes a few conditions have to be met to receive a refundDo not try to deny the event of immersion: Smartphones are equipped with "immersion sensors" which change colors when exposed to liquids.

2.  
Holi is in the corner only and many of us like to play with colors and water during the festival.

  However, there is always a chance that we accidentally damage the smartphone with water.  

So what should you do to save your smartphone? First of all, do not follow the wrong advice!

So, here are some simple tips that can cause your smartphone to get submerged in water.


3. 
Do not: Dry out phone with a hairdryer
The heat from a hairdryer is very hot, it can damage the delicate electronic components in the device

Also, avoid keeping your smartphone in a hot oven (or worse in the oven) or on a radiator.
 


4.
Do not: Do not try to plug it in or push any keys because it can extend the device in waterIf you damage the smartphone with water, then we recommend that you do not plug it in the charger because it will be the reason for the short circuit and it will cause damage.  

In addition, it is also advised that you will not push any keys in any ports because it can move in the device. 

5.
Do: turn it off immediately
If your smartphone is immersed in water then you should do it, to stop it. Using a wet smartphone can be risky and it will cause more damage to the smartphone and it can stop working altogether.
 


6.
Do: Clean well and shake itAfter closing the smartphone, just take a clean and dry cloth and wipe it well. Again, wrap it in paper tissues or in the kitchen towel to absorb it as much as possible moisture.  


Unplug any accessories (headphones, cable, etc.) and remove the SIM card and any memory card. After this, just try mixing the smartphone with all the different angles so that all extra water is released. 

7.
Do: Put the smartphone in a bag full of riceThe ideal solution is to turn off the phone in an airtight box with moisture-absorbing pouch, but not everyone has dehumidifying devices for hands-on tools at all times.Unpolluted rice can be an alternative solution, because grains absorb moisture. 

 However, rice makes too much dust, which is not good for smartphones. Leave the mobile fully dipped in a bag full of rice for at least 24-48 hours. 

8.
Do: You can put the smartphone in the sun in the dry
To dry the device you can put it directly under the sunlight after removing the back panel (if it is removable).  


This will help the handset to dry completely. 

9.
Try A special cleaning service

You can try a service like textery at this point if they are available to you. Large metropolitan areas often have many, similar services
.


10.
stop wait.Give your phone at least 48 hours to dry it Now if you can make your phone honest and tilt it, so the target of the USB port is to be done approximately 24 hours so that it can be ensured That any remaining moisture will move out and below your phone.Avoid jostling or shakingIf you are an adventurous warranty-Wimmer and you have the right tools, you can try to isolate the phone as much as possible before drying it. Here's the kit I suggest that if you want to separate your device, they have also found some great instructions about repairing and re-assembling your devices. 

No comments:

Post a Comment

Search This Blog

Post Bottom Ad